표준 규격 번호 |
등급 |
공통 |
명칭 |
내용 |
Manometer Tables 압력계 도표 |
||||
ISA-2.1-1978 |
RP |
Manometer Tables |
압력계 도표 |
|
Documentation of Measurement and Control Instruments and Systems 계측제어 및 시스템의 설계 작성 |
||||
ISA-5.1-1984 (R1992) |
Instrumentation Symbols and Identification |
계장 심볼과 내용 |
||
ISA-5.2-1976 (R1992) |
Binary Logic Diagrams For Process Operations |
공정운전용 이산제어 논리전개도 |
||
ISA-5.3-1983 |
Graphic Symbols for Distributed Control/Shared Display Instrumentation, Logic, and Computer Systems |
디지털 시스템 그래픽 심볼 |
||
ISA-5.4-1991 |
Instrument Loop Diagrams |
계기 루프 도면 |
||
ISA-5.5-1985 |
Graphic Symbols for Process Displays |
공정 그래픽 심볼 |
||
Instrument Air Standards Committee 계장용 공기 표준 |
||||
ISA-7.0.01-1996 |
ANSI |
Quality Standard for Instrument Air |
계장용 공기 품질 |
|
Electrical Equipment for Hazardous Locations 위험 지역의 전기기기 |
||||
ISA-12.01.01-1999 |
ANSI |
Definitions and Information Pertaining to Electrical Instruments in Hazardous (Classified) Locations |
위험 지역 전기 기기 관련용어 |
|
ISA-12.2-1995 |
TR |
Intrinsically Safe System Assessment Using the Entity Concept |
본질 안전 |
|
ISA-12.2.02-1996 |
RP |
Recommendations for the Preparation, Content, and Organization of Intrinsic Safety Control Drawings |
위험 지역 C1/ Z-0/1/2 - 본질안전 |
|
ISA-12.4-1996 |
RP |
Pressurized Enclosures |
압력형 기기함 |
|
ISA-12.04.01-2004 |
ANSI, IEC |
Electrical Apparatus for Explosive Gas AtmospheresPart 2 Pressurized Enclosures 'p' |
폭발가스 환경의 압력부가 기기함. |
|
ISA-12.06.01-1999 |
TR |
ANSI |
Electrical Equipment in a Class I, Division 2/Zone 2 Hazardous Location |
위험 지역 C1/ D2/ Z2 |
ISA-12.06.01-2003 |
RP |
ANSI |
Recommended Practice for Wiring Methods for Hazardous (Classified) Locations Instrumentation Part 1: Intrinsic Safety |
위험지역의 배선방법:본질안전 |
ISA-12.10-1988 |
Area Classification in Hazardous (Classified) Dust Locations |
위험지역 분류 |
||
ISA-12.12.01-2000 |
ANSI |
Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations |
위험지역 C-I,II/D2 C-1/Z2 C-III/D1,2 |
|
ISA-12.12.03-2002 |
RP |
Recommended Practice for Portable Electronic Products Suitable for Use in Class I and II, Division 2, Class I Zone 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations |
위험지역에서의 휴대용 기기 |
|
ISA-12.13.01-1999 |
TR |
ANSI |
Flammability Characteristics of Combustible Gases and Vapors |
연소성 가스의 가연 특성 |
ISA-12.13.01-2003 |
ANSI |
Performance Requirements for Combustible Gas Detectors |
연소가스 감지기 특성 |
|
ISA-12.13.02-1999 |
TR |
ANSI |
Investigation of Fire and Explosion Accidents in the Chemical, Mining, and Fuel-Related IndustriesA Manual by Kuchta |
발화와 폭발사고의 조사 |
ISA-12.13.02-2003 |
RP |
ANSI, IEC |
Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments |
연소가스 감지지의 설치와 작동 |
ISA-12.21.01-2004 |
TR |
ANSI |
Use of Fiber Optic Systems in Class I Hazardous (Classified) Locations |
광섬유 |
ISA-12.24.01-1998 |
TR |
ANSI, IEC |
Recommended Practice for Classification of Locations for Electrical Installations Classified as Class I, Zone 0, Zone 1, or Zone 2 |
전기 장치 설치를 위한 위험 지역 분류 |
ISA-12.27.01-2003 |
ANSI |
Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids |
프로세스 차폐 |
|
Instrument Signals and Alarms 계기신호와 경보 |
||||
ISA-18.1-1979 |
ANSI |
Annunciator Sequences and Specifications |
계기신호와 경보 |
|
Instrument Specification Forms 계기 사양서 양식 |
||||
ISA-20-1981 |
Specification Forms for Process Measurement and Control Instruments, Primary Elements, and Control Valves |
계기 사양서 양식 |
||
ISA-20.00.01-2001 |
TR |
Specification Forms for Process Measurement and Control Instruments Part 1: General Considerations Updated 2005 |
계기 사양서 양식제 1부-일반사항 |
|
Turbine Flow Meters 터빈 유량계 |
||||
ISA-31.1-1977 |
RP |
Specification, Installation, and Calibration of Turbine Flowmeters |
터빈 유량계 |
|
Measurement Transducers 측정용 변환기 |
||||
ISA-37.1-1975 |
Electrical Transducer Nomenclature and Terminology |
변환기 관련 용어와 정의 |
||
ISA-37.2-1982 |
RP |
Guide for Specifications and Tests for Piezoelectric Acceleration Transducers for Aerospace Testing |
압전식 가속변환기의 사양과 시험 |
|
ISA-37.3-1982 |
Specifications and Tests for Strain Gage Pressure Transducers |
스트레인 게이지 압력변환기 |
||
ISA-37.5-1982 |
Specifications and Tests for Strain Gage Linear Acceleration Transducers |
스트레인 게이지 선형 가속변환기의 사양과 시험 |
||
ISA-37.6-1982 |
Specifications and Tests for Potentiometric Pressure Transducers |
가변저항 압력 변환기 |
||
ISA-37.8-1982 |
Specifications and Tests for Strain Gage Force Transducers |
스트레인게이지 힘 변환기 |
||
ISA-37.10-1982 |
Specifications and Tests for Piezoelectric Pressure and Sound-Pressure Transducers |
압전 압력 및 음압 변환기 |
||
ISA-37.12-1982 |
Specifications and Tests for Potentiometric Displacement Transducers |
가변저항식 위치 변환기 |
||
ISA-37.16.01-2002 |
A Guide for the Dynamic Calibration of Pressure Transducers |
압력변환기의 시험 조정 |
||
Nomenclature for Instrument Tube Fittings 계장 배관 기기 용어 |
||||
ISA-42.00.01-2001 |
RP |
Nomenclature for Instrument Tube Fittings |
계장 배관 기기 용어 |
|
Signal Compatibility of Electrical Instruments 전자식 계기의 신호 적응 |
||||
ISA-50.00.01-1975 |
ANSI |
Compatibility of Analog Signals for Electronic Industrial Process Instruments |
산업공정 전자식 계기 신호 적응 |
|
ISA-50.02 |
Fieldbus Standard for Use in Industrial Control Systems Part 2: Physical Layer Specification and Service Definition |
필드버스 2부 |
||
ISA-50.02, |
ANSI |
Fieldbus Standard for Use in Industrial Control Systems Part 3: Data Link Service Definition |
필드버스 3부 |
|
ISA-50.02, |
ANSI |
Fieldbus Standard for Use in Industrial Control Systems Part 4: Data Link Protocol Specification |
필드버스 4부 |
|
ISA-50.02, |
ANSI |
Fieldbus Standard for Use in Industrial Control Systems Part 5: Application Layer Service Definition |
필드버스 5부 |
|
ISA-50.02, |
ANSI |
Fieldbus Standard for Use in Industrial Control Systems Part 6: Application Layer Protocol Specification |
필드버스 6부 |
|
ISA-50.02, |
TR |
Fieldbus Standard for Use in Industrial Control Systems, Parts 3 & 4: Technical Report for Fieldbus Data Link Layer : Tutorial |
필드버스 3,4부 기술보고서 |
|
Instrumentation Terminology 계장용어와 정의 |
||||
ISA-51.1-1979 |
Process Instrumentation Terminology |
계장용어와 정의 |
||
Environments for Standards Laboratories 표준 실험실의 환경 |
||||
ISA-52.1-1975 |
RP |
Recommended Environments for Standards Laboratories |
표준 실험실의 환경 |
|
Control Centers 중앙제어실 |
||||
ISA-60.1-1990 |
RP |
Control Center Facilities |
중앙제어실 |
|
ISA-60.2-1995 |
RP |
Control Center Design Guide and Terminology |
제어실 설계 기준 |
|
ISA-60.3-1985 |
RP |
Human Engineering for Control Centers |
제어실 인간공학 |
|
ISA-60.4-1990 |
RP |
Documentation for Control Centers |
제어실 문서작성 |
|
ISA-60.6-1984 |
RP |
Nameplates, Labels, and Tags for Control Centers |
제어실 기기 표식 |
|
ISA-60.8-1978 |
RP |
Electrical Guide for Control Centers |
제어실 배선 기준 |
|
ISA-60.9-1981 |
RP |
Piping Guide for Control Centers |
제어실 배관 기준 |
|
ISA-60.11-1991 |
RP |
Crating, Shipping, and Handling for Control Centers |
제어실 운반, 취급 |
|
Nuclear Power Plant Standards 원자력 발전소 표준 |
||||
ISA-67.01.01-2002 |
ANSI |
Transducer and Transmitter Installation for Nuclear Safety Applications |
원자력의 변환기와 전송기 설치 |
|
ISA-67.02.01-1999 |
ANSI |
Nuclear Safety-Related Instrument Sensing Line Piping and Tubing Standard for Use in Nuclear Power Plants |
원자력등급 계기관로 설치 기준 |
|
ISA-67.03-1982 |
Standard for Light Water Reactor Coolant Pressure Boundary Leak Detection |
원자로 냉각재 압력 누출 감지 |
||
ISA-67.04.01-2006 |
ANSI |
Setpoints for Nuclear Safety-Related Instrumentation |
원자력 등급 설정치 |
|
ISA-67.04.02-2000 |
RP |
Methodologies for the Determination of Setpoints for Nuclear Safety-Related Instrumentation |
원자력 등급 설정 방법론 |
|
ISA-67.04.08-1996 |
TR |
ANSI |
Setpoints for Sequenced Actions |
순차 작동 설정치 |
ISA-67.04.09-2005 |
TR |
Graded Approaches to Setpoint Determination |
차등 설정치 |
|
ISA-67.06.01-2002 |
ANSI |
Performance Monitoring for Nuclear Safety-Related Instrument Channels in Nuclear Power Plants |
원자력발전 안전등급 감시장치 |
|
ISA-67.14.01-2000 |
ANSI |
Qualifications and Certification of Instrumentation and Control Technicians in Nuclear Facilities |
원자력설비의 계장기술 품질 |
|
Environmental Conditions for Process Measurement and Control 공정 계측 제어를 위한 환경 조건 |
||||
ISA-71.01-1985 |
Environmental Conditions for Process Measurement and Control Systems: Temperature and Humidity |
온.습도 계측 제어를 위한 환경 조건 |
||
ISA-71.02-1991 |
Environmental Conditions for Process Measurement and Control Systems: Power |
전력 계측 제어를 위한 환경 조건 |
||
ISA-71.03-1995 |
Environmental Conditions for Process Measurement and Control Systems: Mechanical Influences |
기계적 계측 제어를 위한 환경 조건 |
||
ISA-71.04-1985 |
Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants |
대기오염 계측 제어 환경 조건 |
||
Continuous Weighing Instrumentation 연속 중량 계측 |
||||
ISA-74.01-1984 |
RP |
Application and Installation of Continuous-Belt Weigh bridge Scales |
연속벨트식 중량 계측 |
|
Control Valve Standards 조절밸브 표준 |
||||
ISA-75.01.01-2002 |
ANSI, IEC |
Flow Equations for Sizing Control Valves |
조절 밸브 크기선정 공식 |
|
ISA-75.02-1996 |
ANSI |
Control Valve Capacity Test Procedures |
밸브 용량시험 장치 |
|
ISA-75.04.01-1998 |
TR |
Control Valve Position Stability |
조절밸브 안전성 |
|
ISA-75.05.01-2000 |
ANSI |
Control Valve Terminology |
조절밸브 관련용어 |
|
ISA-75.07-1997 |
Laboratory Measurement of Aerodynamic Noise Generated by Control Valves |
밸브소음측정예측 |
||
ISA-75.08-1999 |
ANSI |
Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves |
밸브 면간 거리-핀치밸브 |
|
ISA-75.08.01-2002 |
ANSI |
Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) |
밸브 면간 거리-글로브 |
|
ISA-75.08.02-2003 |
ANSI |
Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600) |
밸브 면간 거리-삽입형 |
|
ISA-75.08.03-2001 |
ANSI |
Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) |
밸브 면간 거리-용접 및 나사체결형 |
|
ISA-75.08.04-2001 |
ANSI |
Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 4500) |
밸브 면간 거리-용접형 4500 등급 |
|
ISA-75.08.05-2002 |
ANSI |
Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) |
밸브 면간 거리-용접형 |
|
ISA-75.08.06-2002 |
ANSI |
Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) |
밸브 면간 거리-글로브 |
|
ISA-75.08.07-2001 |
ANSI |
Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600) |
밸브 면간 거리-부리형 후렌지 |
|
ISA-75.08.09-2004 |
Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150, 300, and 600) |
밸브 면간 거리-평판형 |
||
ISA-75.11.01-1985 |
ANSI |
Inherent Flow Characteristic and Rangeability of Control Valves |
조절밸브의 유량특성과 제어성 |
|
ISA-75.13-1996 |
Method of Evaluating the Performance of Positioners with Analog Input Signals and Pneumatic Output |
조절밸브 포지쇼너의 성능 |
||
ISA-75.17-1989 |
Control Valve Aerodynamic Noise Prediction |
밸브소음측정예측 |
||
ISA-75.19.01-2001 |
ANSI |
Hydrostatic Testing of Control Valves |
밸브 내압 테스트 |
|
ISA-75.21-1989 |
RP |
Process Data Presentation for Control Valves |
조절밸브에서의 공정 데이터 |
|
ISA-75.22-1999 |
ANSI |
Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (ANSI Classes 150, 300, and 600) |
밸브 면간 거리-앵글밸브 |
|
ISA-75.23-1995 |
RP |
Considerations for Evaluating Control Valve Cavitation |
조절밸브 케비테이션 |
|
ISA-75.25.01-2000 |
ANSI |
Test Procedure for Control Valve Response Measurement from Step Inputs |
조절밸브 응답성 측정 과정 |
|
ISA-75.25.02-2000 |
TR |
ANSI |
Control Valve Response Measurement from Step Inputs |
밸브 응답 측정 |
ISA-75.26.01-2006 |
ANSI |
Control Valve Diagnostic Data Acquisition and Reporting |
밸브 성능 측정 |
|
Composition Analyzers 성분 분석기 |
||||
ISA-76.0.01-1998 |
RP |
Analyzer System Inspection and Acceptance |
성분 분석기 |
|
ISA-76.00.02-2002 |
ANSI |
Modular Component Interfaces for Surface-Mount Fluid Distribution Components Part 1: Elastomeric Seals |
액상 접촉에서의 차폐막 |
|
Fossil Power Plant Standards 화력발전소의 표준 |
||||
ISA-77.13.01-1999 |
ANSI |
Fossil Fuel Power Plant Steam Turbine Bypass System |
화력발전 바이패스 |
|
ISA-77.20-1993 |
ANSI |
Fossil Fuel Power Plant Simulators Functional Requirements |
화력발전 시물레이터 기본기능 |
|
ISA-77.41.01-2005 |
ANSI |
Fossil Fuel Power Plant Boiler Combustion Controls |
화력발전 연소계통 |
|
ISA-77.42.01-1999 |
ANSI |
Fossil Fuel Power Plant Feedwater Control System : Drum-Type |
화력발전 급수계통 |
|
ISA-77.44.01-2000 |
ANSI |
Fossil Fuel Plant Steam Temperature Control System (Drum-Type) |
화력발전 온도제어 |
|
ISA-77.44.02-2001 |
ANSI |
Fossil Fuel Power Plant Steam Temperature Control System : Once-Through Type |
화력발전 온도제어 |
|
ISA-77.60.02-2000 |
RP |
Fossil Fuel Power Plant Human-Machine Interface: Alarms |
화력발전 경보장치 |
|
ISA-77.60.04-1996 |
TR |
Fossil Fuel Power Plant Human-Machine Interface-CRT Displays |
화력발전 감시 CRT |
|
ISA-77.70-1994 |
ANSI |
Fossil Fuel Power Plant Instrument Piping Installation |
화력발전 계장배관 |
|
Electrical and Electronic Instrumentation 전기 및 전자식 계장 |
||||
ISA-82.02.02-1996 |
IEC |
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use |
전자식 계장의 안전 |
|
ISA-82.03-1988 |
Safety Standard for Electrical and Electronic Test, Measuring, Controlling, and Related Equipment |
전자식 계장 및 관련장치의 안전 |
||
ISA-84.00.01-2004 |
ANSI, IEC |
Functional Safety: Safety Instrumented Systems for the Process Industry Sector Part 1: Framework, Definitions, System, Hardware and Software Requirements |
안전 계장-제 1부 |
|
ISA-84.00.01-2004 |
ANSI, IEC |
Functional Safety: Safety Instrumented Systems for the Process Industry Sector Part 2: Guidelines for the Application of ANSI/ISA-84.00.01-2004 Part 1 (IEC 61511-1 Mod)Informative |
안전 계장-제 2부 |
|
ISA-84.00.01-2004 |
ANSI, IEC |
Functional Safety: Safety Instrumented Systems for the Process Industry Sector Part 3: Guidance for the Determination of the Required Safety Integrity Levels Informative |
안전 계장-제 3부 |
|
ISA-84.00.02-2002 |
TR |
Safety Instrumented Functions (SIF) Safety Integrity Level (SIL) Evaluation Techniques Package |
안전계장등급 평가 |
|
ISA-84.00.02-2002, |
TR |
Safety Instrumented Functions (SIF)Safety Integrity Level (SIL) Evaluation Techniques Part 1: Introduction |
안전계장등급 평가-제 1부 |
|
ISA-84.00.02-2002, |
TR |
Safety Instrumented Functions (SIF)Safety Integrity Level (SIL) Evaluation Techniques Part 2: Determining the SIL of a SIF via Simplified Equations |
안전계장등급 평가-제 2부 |
|
ISA-84.00.02-2002, |
TR |
Safety Instrumented Functions (SIF)Safety Integrity Level (SIL) Evaluation Techniques Part 3: Determining the SIL of a SIF via Fault Tree Analysis |
안전계장등급 평가-제 3부 |
|
ISA-84.00.02-2002, |
TR |
Safety Instrumented Functions (SIF)Safety Integrity Level (SIL) Evaluation Techniques Part 4: Determining the SIL of a SIF via Markov Analysis |
안전계장등급 평가-제 4부 |
|
ISA-84.00.02-2002, |
TR |
Safety Instrumented Functions (SIF)Safety Integrity Level (SIL) Evaluation Techniques Part 5: Determining the PFD of SIS Logic Solvers via Markov Analysis |
안전계장등급 평가-제 5부 |
|
ISA-84.00.03-2002 |
TR |
Guidance for Testing of Process Sector Safety Instrumented Functions (SIF) Implemented as or Within Safety Instrumented Systems (SIS) |
안전계장기능의 공정부문 평가기법 |
|
ISA-84.00.04-2005, |
TR |
Guideline on the Implementation of ANSI/ISA-84.00.01-2004 (IEC 61511 Mod) |
안전 계장-제 1부의 실행기법 |
|
ISA-84.00.04-2005 |
TR |
Example Implementation of ANSI/ISA-84.00.01-2004 (IEC 61511 Mod) |
안전 계장-제 1부의 실제 적용 |
|
Batch Control 회분공정 제어 |
||||
ISA-88.00.02-2001 |
ANSI |
Batch Control Part 2: Data Structures and Guidelines for Languages |
회분제어 데이터 구조와 언어 |
|
ISA-88.0.03-1996 |
TR |
Possible Recipe Procedure Presentation Formats |
회분공정 활용요소 |
|
ISA-88.00.04-2006 |
ANSI |
Batch Control Part 4: Batch Production Records |
회분제어 생산기록 |
|
ISA-88.01-1995 |
Batch Control Part 1: Models and Terminology (Formerly ANSI/ISA-S88.01-1995) |
회분제어 용어정의 |
||
Criticality Ranking for Instrumentation 계장의 중요 우선순위 |
||||
ISA-91.00.01-2001 |
ANSI |
Identification of Emergency Shutdown Systems and Controls that are Critical to Maintaining Safety in Process Industries |
계장의 중요 우선순위 |
|
Performance Requirements for Health and Safety 보건 및 안전에 사용되는 대기측정 계기의 성능 요건 |
||||
ISA-92.0.01, |
Performance Requirements for Toxic Gas-Detection Instruments: Hydrogen Sulfide |
유독가스 검출기의 기본 성능 |
||
ISA-92.0.02-1998 |
RP |
Installation, Operation, and Maintenance of Toxic Gas-Detection Instruments: Hydrogen Sulfide |
유독가스 검출기의 설치와 운전 |
|
ISA-92.02.01, |
ANSI |
Performance Requirements for Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale) |
일산화탄소 검출기의 기본성능 |
|
ISA-92.02.02, |
RP |
Installation, Operation, and Maintenance of Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale) |
일산화탄소 검출기의 설치와 운전 |
|
ISA-92.03.01-1998 |
Performance Requirements for Ammonia Detection Instruments (25-500 ppm) |
암모니아 검출기의 기본 성능 |
||
ISA-92.03.02-1999 |
RP |
Installation, Operation, and Maintenance of Ammonia Detection Instruments (25-500 ppmFull Scale) |
암모니아 검출기의 설치와 운전 |
|
ISA-92.04.01, |
Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres |
산소부족 검출기의 기본 성능 |
||
ISA-92.04.02, |
RP |
Installation, Operation, and Maintenance of Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres |
산소부족 검출기의 설치와 운전 |
|
ISA-92.06.01-1998 |
Performance Requirements for Chlorine Detection Instruments (0.5-30 ppm Full Scale) |
염소 검출기의 기본 성능 |
||
ISA-92.06.02-1999 |
RP |
Installation, Operation, and Maintenance of Chlorine Detection Instruments (0.5-30 ppmFull Scale) |
염소 검출기의 설치와 운전 |
|
ISA-92.06.03-1999 |
TR |
ANSI |
Feasibility of Chlorine Detection Instrument Testing |
염소 검출기 배관 |
Evaluation of Leakage Automated On-Off valve 차단밸브 차폐성능 |
||||
ISA-93.00.01-1999 |
ANSI |
Standard Method for the Evaluation of External Leakage of Manual and Automated On-Off Valves |
차단밸브의 밀폐성 평가 기준 |
|
Enterprise/Control Integration 기업/제어 통합기술 |
||||
ISA-95.00.01-2000 |
ANSI |
Enterprise-Control System Integration Part 1: Models and Terminology |
기업/제어정보
|
|
ISA-95.00.02-2001 |
ANSI |
Enterprise-Control System Integration Part 2: Object Model Attributes |
기업/제어정보
|
|
ISA-95.00.03-2005 |
ANSI |
Enterprise-Control System Integration, Part 3: Models of Manufacturing Operations Management |
기업/제어정보
|
|
ISA-MC96.1-1982 |
Temperature Measurement Thermocouples |
열전대 온도측정 |
||
ISA-98.00.01-2002 |
ANSI |
Qualifications and Certification of Control System Technicians |
제어기사 자격증 |
|
ISA-98.00.02-2006 |
TR |
Skill Standards for Control System Technicians |
제어기사 기본 |
|
2. Manufacturing and Control sysytem Security 생산과 제어 시스템에서의 안전 |
||||
ISA-d99.00.01 |
DRAFT |
Manufacturing and Control Systems Security Part 1: Concepts, Models and Terminology |
생산과 제어의 안전-제1부 |
|
ISA-99.00.01-2004 |
TR |
ANSI |
Security Technologies for Manufacturing and Control Systems |
생산과 제어의 안전 정의 |
ISA-99.00.02-2004 |
TR |
ANSI |
Integrating Electronic Security into the Manufacturing and Control Systems Environment |
생산과 제어의 전자계통의 안전 |
ISA-d99.00.02 |
DRAFT |
Manufacturing and Control Systems Security Part 2: Establishing a Manufacturing and Control Systems Security Program |
생산과 제어의 안전-제2부 |
|
2. Electrical Apparatus for Hazardous Area 위험지역에서의 전자기기 |
||||
ISA-60079-18 |
ANSI, IEC |
Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of Protection Encapsulation |
위험지역
전자기기 |
|
ISA-60079-1 |
ANSI, IEC |
Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection Flameproof |
위험지역
전자기기 |
|
ISA-60079-7 |
ANSI, IEC |
Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection Increased Safety "e" |
위험지역
전자기기 |
|
ISA-60079-6 |
ANSI, IEC |
Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection Oil-Immersion 'o' |
위험지역
전자기기 |
|
ISA-60079-5 |
ANSI, IEC |
Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection Powder Filling 'q' |
위험지역
전자기기 |
|
ISA-60079-15 |
ANSI, IEC |
Electrical Apparatus for Use in Class I, Zone 2 Hazardous (Classified) Locations Type of Protection |
위험지역
전자기기 |
|
ISA-60079-0 |
ANSI, IEC |
Electrical Apparatus for Use in Class I, Zones 0, 1 & 2 Hazardous (Classified) Locations: General Requirements |
위험지역
전자기기 |
|
ISA-60079-27 |
IEC |
Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO) |
필드버스 본질안전 |
|
ISA-61010-1 |
ANSI, IEC |
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use : Part 1: General Requirements |
전자기기
안전요건 |
|
ISA-61241-10 |
ANSI, IEC |
Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations Classification of Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations |
위험지역
전자기기 |
|
ISA-61241-11 |
IEC |
Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations Protection by Intrinsic Safety "iD" |
위험지역
전자기기 |
|
ISA-61241-0 |
ANSI, IEC |
Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations : General Requirements |
위험지역 전자기기 |
|
ISA-61241-18 |
IEC |
Electrical Apparatus for Use in Zone 20, Zone 21, & Zone 22 Hazardous (Classified) Locations Protection by Encapsulation "mD" Downloadable. |
위험지역
전자기기 |
|
ISA-61241-2 |
IEC |
Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations Protection by Pressurization "pD" |
위험지역
전자기기 |
|